
Beauty ORA Electric Microneedle Roller Derma Pen System (0.25-2.0 mm Range) - Corded Version
Item#: beautyora_microneedlerdpscv

Product Description
Product Description:
How To Use:
- Before treatment, cleanse the skin areas to be treated and dry them.
- Then, select the needle length (between 0.25mm to 2.0mm) and set the speed on the device that best suits the area and condition you want to treat (refer to Manual).
- Lightly move the device using slow circular motions by making small circles from right to left. Do not press the Derma Pen too hard on the skin.
- Once you've treated the area using circular motions, then do a second treatment on the same area again but this time make vertical motions from top to bottom a few times. Then do a third treatment on the same area again but this time use diagonal strokes across the entire area.
- Following treatment, be sure to disinfect the needle heads using alcohol.
- The ORA Dermapen System comes with 2 replacement needle heads. After repeated use of the same needle head over time, the needles will become dull and you should replace the needle head with a new one (once you no longer have replacement heads, additional ones can be purchased on theBeautyora.com site).
Changing Your Needle Head:
- 1. Plug the adapter into the device and then plug into an electric wallet.
- 2. Take out the needle cartridge from the sterilized packaging.
- 3. To place the needle cartridge on the electric roller, place it on the head of the roller and then push it in while turning the cartridge clockwise until the two openings on the cartridge get locked into the two round slots on the roller.
- 4. To remove the cartridge, turn the cartridge counter clockwise and pull the cartridge off once the cartridge opening are no longer locked into the two round slots on the roller.
Changing Your Device Speed & Needle Length:
- To turn the device on, press the power button for several seconds until the light on the power button turns green. To turn the device off, press the same power button down for a few seconds until the device is off.
- To change speeds in your 5-speed electric roller, simply press the power button once after the device is on. When first turned on, the device starts on the lowest speed. The following are the speed settings:Level 1: Green | Level 2: Orange | Level 3: Red | Level 4: Pink | Lever 5: Blue
- The electric roller needle depth can be adjusted between 0.25mm up to 2.0mm. To adjust the needle length, turn the adjustment ring on the roller clockwise to make the length longer or counter clockwise to shorten the length of the needles.
Alana Recommends
How subscriptions work
Products are automatically delivered on your schedule. No obligation, modify or cancel your subscription anytime.
Products are automatically delivered on your schedule. No obligation, modify or cancel your subscription anytime.
Learn more...